Today we are working with the Sweater Weather Kit. We are taking the Sweater Weather Post Insert Kit and making a yard sign out of it. When the cool air comes in the first thig we do is grab that sweater! Celebrating fall is my favorite. I have more decorations for this season then all the other seasons/holidays put together!
You can find the wood kit on Teri Denne's. this sign will end up being approx.. 19"x 24". (Not including the signpost)
DIY Fall Signpost Kit — Step‑by‑Step Tutorial
Before you start assembling your fall signpost kit, take a moment to separate all the pieces and lay them out on your background. This helps you visualize your design and decide how you want everything arranged. For my project, I’m choosing the chevron pattern across the bottom, with the pumpkin and leaves layered on top.
1. Plan Your Layout
Spread out all the pieces and play with the arrangement until you like the look. Pick your colors before you begin painting or staining.
2. Separate by Color
Once you know your layout, group the pieces by color. This makes painting easier and keeps everything organized.
3. Paint or Stain the Pieces
Paint or stain each group of pieces. Let them dry completely before moving on to the next step.
4. Start Gluing
After everything is dry, grab your glue.
-
Glue down the chevron background first.
-
Add the pumpkin and leaves on top. Let the glue fully cure before assembling the signpost.
- Glue down all the extras as you see fit.
5. Assemble the Signpost
Now it’s time to put the sign together.
-
Glue your sign piece onto the signpost.
-
Add the bottom piece by threading the back hole through the signpost. For easier storage, you can leave the pieces unglued. If you want a sturdier, permanent sign, add a small dab of glue to each piece before attaching.
6. Add the Cup of Cocoa
Attach the cup of cocoa to the front hole of the signpost. Let all glue dry completely.
Making It Weather‑Resistant
To protect your sign for outdoor use, add a clear coating. I use shellac.
-
If you’re keeping the pieces separate, apply your coating before assembling.
-
If you’re gluing everything together, use a spray sealant and coat the entire sign at once. I usually apply two to three coats for durability.